With the credit crunch biting and the housing market fairly stagnant, folks are turning towards a little DIY both to make their living environment more pleasing and also to potentially optimize the value of the property when the time does come to market again.
A UK retailer recently reported an uplift in earnings of kitchen replacement and refurbishment goods instead of investment in whole new kitchens – and many reliable resources from the DIY market guess to have had an increase in sales also. So here is some advice on giving your kitchen a small makeover that will brighten your day.
Let’s kick off with something simple such as kitchen drawer and cupboard handles. All these come in a huge variety of styles and sizes and can make a major difference to the look and feel of the kitchen. Conventional and cabin style kitchens may change personalities with the use of a different doorknob or handle. Replacing a simple wooden pine doorknob (which come as standard in a lot of kitchen designs) using a finely crafted antique pewter style twisted bar handle will lift your room from the ordinary into the extra-ordinary – and believe me it’s rather extraordinary that something appears to be too little can make such a big difference. If you want to push out the boat when it comes to grips, then contact Calgary Kitchen Designs and Remodeling Ideas – solid pewter handles can create a stunning effect. They’re more expensive – at approximately #15 each, they are more of a luxury, but well worth it for a superb finish.
For those of you with a little more dream from the DIY region, Replacement Doors are pretty much like using a new kitchen and they are surprisingly simple to fit. They come in a myriad of styles and colors, contemporary replacement doors are inclined toward the more sleek and simple designs in many different colors and wood effect finishes. Vintage doors have more detail but keep the simplicity which makes them classic favorites and traditional replacement doors are more complicated and tend towards the wooden impact finishes than color.
So what’s involved with matching replacement doors? In most cases, it’s very straightforward. The huge majority of kitchen cupboard doors come in standard sizes in width and height and are secured using standard fittings. The hinges fasten via a small backplate that screws on the walls of the cabinet plus the hinge itself that in most instances sits inside a 35mm drilled hole in the door, fastened using two or three small screws. The hinge component fixes to the backplate component either by sliding procuring and on with one screw or by clipping on. calgary kitchen renovations, To release the doorway in the cupboard, all you need do is either flip the clip or undo the screw.
As soon as you’ve removed the doorway (and please do not be worried about doing so, it is quite easy to put back !), then you can take a look at the condition of the hinges. Provided that they’re functioning OK and still clean and nice, then there’s no requirement to replace them, just use them again on your new doors. Otherwise, you’ll need to purchase the same style and volume to refit with all the new doors.
The next step is to quantify your doors, width, and height. (again, my website has information regarding standard doors dimensions ). Then you have a choice whether to get the 35mm holes for the hinges (mentioned previously ) pre-drilled into the doors when you purchase them. Legacy Kitchens – To do this you’ll have to offer the supplier with the exact areas of the holes by measuring the distance from the top along with the doorway to the hole centers (this is covered in the manual on my website ). If you want to DIY it, then it’s possible to use a 35mm Forstner piece attached to your typical drill. There is some leeway for adjustment either vertically and horizontally in the concealed hinges, so get it as accurately centered as you possibly can, however, you can make adjustments if needed.
So that you have measured all of your doors and drawer fronts and evaluated how many cupboard hinges you might need – you just place your order! When the doors arrive, fix the hinge part of the concealed hinges into the 35mm holes in the door, and simply attach them to the backplates affixed to the inside of the cabinets.
That is it! Of course, in case you have any suspicions at all, contact a local section of the joiner kitchen fitter for information. And if you’ve got a bespoke kitchen you may have to contact your provider to talk about your requirements.